Zennio Z41 Manual descarregar pdf (Página 37)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

b) Scenes specific page

Each Scene specific page allows the configuration of up to 8 different scenes.

Figure 3.18: Scenes specific page configuration

Each box that is enabled has a button in the centre, whose icon may be configured by

parameter, and a descriptive name used as the box’s label. In addition the following

parameters must be configured:

 Number: Numerical value between 1 and 64, associated to a scene.

 Action: There are two options; ‘Run’ or ‘Run and Save’. The first option only allows

scenes to be executed. The second option additionally allows the current state of those

KNX devices associated with the specified scene to be saved. On executing a scene the

scene number will be sent to the bus via the object "[General] Scenes". On saving a

scene the scene number with the ‘save’ flag will be sent.

 Icon: To select the button icon (Refer to the icons list in the document "Z41 - Icons

List", available at http://www.zennio.com).

To run the scene, press the button (short press). To save a scene, press the button and

maintain the press for at least 3 seconds.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 52 53

Sem comentários

Zennio Z41 Manual Página 37