Zennio Z41 Manual descarregar pdf (Página 29)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

 Maximum value: The maximum value, in the range 0…65535, that may be reached

by pressing the right button.

 Increment short: The increment or decrement, in the range 0…32767, to be applied

to the current value with every short press of the right or left button, respectively.

 Increment long: The increment or decrement, in the range 0…32767, to be applied

to the current value with every long press of the right or left button, respectively.

Float (Temperature): This provides a control orientated towards absolute temperature.

The objects "[Home x - Box y] Temperature Control" and "[Home x - Box y] Temperature

Indicator" are enabled, and the following configuration options appear:

 Initial value [ºC]: The initial value of the control and indicator objects, in the range

0…95ºC, after downloading the configuration or a ‘reset device’. The default value is

25ºC.

 Minimum value [ºC]: The minimum value, in the range 0…95ºC, that may be

reached by pressing the left button.

 Maximum value [ºC]: The maximum value, in the range 0…95ºC, that may be

reached by pressing the right button.

 Increment short: The increment or decrement (0.1ºC, 0.2ºC, 0.5ºC, 1ºC, 2ºC, 5ºC)

to be applied to the current value with every short press of the right or left button,

respectively.

 Increment long: The increment or decrement (0.1ºC, 0.2ºC, 0.5ºC, 1ºC, 2ºC, 5ºC) to

be applied to the current value with every long press of the right or left button,

respectively.

Light dimming: This control allows the Z41 to manipulate the brightness level of light

sources connected to the KNX bus by sending and receiving values via the communication

objects dedicated to this objective; "[Home x - Box y] Light On/Off" (1-bit object), "[Home x -

Box y] Light Indicator" (1-byte object) and "[Home x - Box y] Light Dimming" (4-bits object).

The parameter Dimming step indicates the increment or decrement of the brightness level to

be applied with each button press/step. Table 3.1 summarizes the available dimming steps.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 52 53

Sem comentários

Zennio Z41 Manual Página 29