Zennio Z41 Manual descarregar pdf (Página 27)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

communication objects will be shown: "[Home x - Box y] 1 byte Control" and "[Home x - Box

y] 1 byte Indicator", and the following configuration options appear:

 Initial value: The initial value of the control and indicator objects, in the range

0…255, after downloading the configuration or a ‘reset device’.

 Minimum value: The minimum value, in the range 0…255, that may be reached by

pressing the left button.

 Maximum value: The maximum value, in the range 0…255, that may be reached by

pressing the right button.

 Increment short: The increment or decrement, in the range 0…127, to be applied to

the current value with every short press of the right or left button, respectively.

 Increment long: The increment or decrement, in the range 0…127, to be applied to

the current value with every long press of the right or left button, respectively.

Percentage: This option allows the Z41 to communicate with the rest of devices in the

installation by sending a byte (0…255) representing a percentage value between 0 and

100%. When selecting this option, two new 1-byte communication objects will be shown:

"[Home x - Box y] 1 byte Control" and "[Home x - Box y] 1 byte Indicator", and the following

configuration options appear:

 Initial value (%): The initial value of the control and indicator objects, in the range

0…100%, after downloading the configuration or a ‘reset device’.

 Minimum value (%): The minimum value, in the range 0…100%, that may be

reached by pressing the left button.

 Maximum value (%): The minimum value, in the range 0…100%, that may be

reached by pressing the right button.

 Increment short (%): The increment or decrement, in the range 0…100%, to be

applied to the current value with every short press of the right or left button, respectively.

 Increment long (%): The increment or decrement, in the range 0…100%, to be

applied to the current value with every long press of the right or left button, respectively.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 52 53

Sem comentários

Zennio Z41 Manual Página 27