Zennio Z41 Manual descarregar pdf (Página 23)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

 Toggle: Every time the button is pressed (short press), the value “1” or “0” will be

sent to the KNX bus via the object "[Home x -Box y] Binary Control". The value sent will

be the opposite of its current value. I.e. if the current value is “0” a “1” will be sent and

vice versa.

 0: Every time the button is pressed (short press), “0” will be sent via the object

"[Home x -Box y] Binary Control".

 1: Every time the button is pressed (short press), “1” will be sent via the object

"[Home x -Box y] Binary Control".

 Short 1 - Long 0: A short press of the button will send the value “1” to the bus via

the object "[Home x - Box y] Binary Control", whereas a long press will send the value

"0".

 Short 0 - Long 1: A short press of the button will send the value “0” to the bus via

the object "[Home x - Box y] Binary Control", whereas a long press will send the value

"1".

Integer (1 byte): On selecting this option the 1-byte object "[Home x - Box y] 1 byte

Control" is enabled, via which the numerical value (0…255) parameterized in the field "Fixed

Value" will be sent to the KNX bus when the button is pressed (short press).

Scene: This option allows running and/or saving scenes. To run the scene, press the

button (short press). To save a scene, press the button and maintain the press for at least 3

seconds. It is necessary to configure the following options:

 Function: There are two options; ‘Run’ or ‘Run and Save’. The first option only

allows scenes to be executed. The second option additionally allows the current state of

those KNX devices associated with the specified scene to be saved. On executing a

scene the scene number will be sent to the bus via the object "[General] Scenes". On

saving a scene the scene number with the ‘save’ flag will be sent.

 Scene number: Numerical value between 1 and 64.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Sem comentários

Zennio Z41 Manual Página 23