Zennio Z41 Manual descarregar pdf (Página 26)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

Figure 3.15: 2-button control and text indicator

This is generic control used to communicate with KNX devices that are manipulated via their

objects. In addition it is possible to view the current status of the KNX device reflected by the

central text indicator..

The boxes configured as ‘2-button control and text indicator’ can be of several types: Binary,

Integer (1 byte), Percentage, Enumeration, Integer (2 bytes), Float (Temperature), Light dimming

and Shutter control.

Binary: When selecting this option, two new 1-bit communication objects will be shown:

"[Home x - Box y] Binary Control" and "[Home x - Box y] Binary Indicator", which allow the

Z41 to manipulate KNX devices by sending a binary value "0" or "1". One of the following

behaviors can be selected:

 Left 0 - Right 1: Every time the left button is pressed (short press), the value "0" will

be sent to the bus via the object "[Home x - Box y] Binary Control" and the text

configured in "Off Text" will be displayed. Every time the right button is pressed (short),

the value "1" will be sent and the text configured in "On Text" will be displayed.

 Left 1 - Right 0: Every time the left button is pressed (short press), the value "1" will

be sent to the bus via the object "[Home x - Box y] Binary Control" and the text

configured in "Off Text" will be displayed. Every time the right button is pressed (short),

the value "0" will be sent and the text configured in "On Text" will be displayed.

Integer (1 byte): This option allows the Z41 to communicate with the rest of devices in

the installation by sending a byte (0…255). When selecting this option, two new 1-byte

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 52 53

Sem comentários

Zennio Z41 Manual Página 26