Zennio Z41 Manual descarregar pdf (Página 16)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

Ethernet: On selecting this option a new configuration window will be shown in the left

menu (Figure 3.6).

Figure 3.6: Ethernet connection configuration

In this window, it will be possible to configure the following options, related to the Ethernet

connection:

 Device description: A string of up to 40 characters, to identify the Z41 panel.

Providing a descriptive name is necessary in installations where there are several Z41s

connected to the same local area network (LAN), so that each Z41 may be indentified

when updating their firmware via Ethernet.

 IP Address assignment: Fixed to DHCP. A DHCP server will automatically assign

an IP address to the panel.

Note I: Ethernet cable must be connected before the panel starts.

Note II: It is necessary that the panel is connected to a DHCP (Dynamic Host Configuration

Protocol) server to carry out the automatic IP address assignment.

If the panel is connected to an Ethernet network, and it has been assigned an IP address, it is

possible to perform an upgrade of the firmware via the network. Please refer to “Z41 – USB

and Ethernet updates” available at http://www.zennio.com for more details.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Sem comentários

Zennio Z41 Manual Página 16