Zennio Z41 Manual descarregar pdf (Página 12)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

Temperature: The current ambient room temperature as measured by the Z41’s internal

sensor. This object is periodically sent to the bus.

Illumination: The Z41’s backlight will automatically switch off after a pre-determined time

to preserve energy and also to avoid being an unwanted source of light. Writing the value “1”

to this 1-bit object will illuminate the display. Writing the value "0" has no effect.

Touch block: This 1-bit object may be used to enable or disable user input to the Z41.

Writing the value “1” to this object will disable user input causing the Z41 to ignore all presses

of the touch screen. Writing the value “0” to this object will enable touch input and the Z41 will

respond once again to user input.

When editing InZennio Z41’s parameters for the first time the following parameter configuration

window can be seen:

Figure 3.2: Default parameterization screen

As can be seen in figure 3.2, the parameterization screen has five sections, enabled by default.

These are:

Main configuration: Divided into two sections:

 General: To configure the following general features of the Z41: Power supply

voltage, internal temperature sensor, default theme, Ethernet and thermostats.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

Sem comentários

Zennio Z41 Manual Página 12